optoway sps-9310vw-c xx g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2009 v2.0 1 sps-9310vw-c xx g (rohs compliant) cwdm / 3 gb/s medium power single optical sm digital diagnostic transmitter ********************************************************************************************************************************************************************** features l smpte 297-2006 compatible l speed from 50 mbps to 3 gbps l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l single cwdm transmitter: 1270 nm to 1610 nm l based on industry standard sfp l sff-8472 digital diagnostic function l two independent ttl laser disable input l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the sps-9310vw-cxxg is a single channel optical single mode transmitter module designed to transmit optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for transmitted the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. it is with a cwdm dfb laser transmitters. there are eighteen center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx1 tx2 p/no. type bit rate (mb/s) (nm) power (dbm) (nm) power (dbm) package temp ( o c) rohs compliant sps-9310vw-c xx g 1-tx 50 to 3000 xx* -3 to -8 lc sfp with dmi 0 to 70 yes *: xx is for channel 1 cwdm wavelength (0 to 70 o c) central wavelength min. (nm) typ. (nm) max. (nm) clasp color code central wavelength min. (nm) typ. (nm) max. (nm) clasp color code -c270 1264.5 1270 1277.5 light purple -c450 1444.5 1450 1457.5 yellow orange -c290 1284.5 1290 1297.5 sky blue -c470 1464.5 1470 1477.5 gray -c310 1304.5 1310 1317.5 yellow green -c490 1484.5 1490 1497.5 violet -c330 1324.5 1330 1337.5 yellow ocher -c510 1504.5 1510 1517.5 blue -c350 1344.5 1350 1357.5 pink -c530 1524.5 1530 1537.5 green -c370 1364.5 1370 1377.5 beige -c550 1544.5 1550 1557.5 yellow -c390 1384.5 1390 1397.5 white -c570 1564.5 1570 1577.5 orange -c410 1404.5 1410 1417.5 silver -c590 1584.5 1590 1597.5 red -c430 1424.5 1430 1437.5 black -c610 1604.5 1610 1617.5 brown cwdm * : 18 wavelengths from 1270 nm to 1610 nm, each step 20 nm. related products rx1 rx2 p/no. type bit rate (mb/s) (nm) power (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant SPS-9110VW-1G 1rx 50 to 3000 1260/1620 0 to -20 lc sfp with dmi 0 to 70 yes sps-9380vw-1g 1rx 50 to 3000 1260/1620 -9 to -28 lc sfp with dmi 0 to 70 yes
optoway sps-9310vw-c xx g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2009 v2.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 200 300 ma transmitter specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -8 -3 dbm 1 output center wavelength l l c C 5.5 l c l c +7.5 nm 2 output spectrum width dl --- 1 nm -20 db width side mode suppression ratio smsr 30 db extinction ratio er 5 7.5 db relative intensity noise rin -120 db/hz 135 ps 3, smpte 424m 270 ps 3, smpte 292m 800 ps 3, smpte 344m optical rise time / fall time tr / tf 1.5 ns 3, smpte 259m electrical differential input voltage v ih - v il 200 1200 mvp-p ac coupled input disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h 2.0 vcc+0.3 v tx ouput disabled v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. output power is power coupled into a 9/125 m m single mode fiber. 2. itu-t g.694.2 cwdm wavelength from 1470 nm to 1610 nm, each step 20 nm. 3. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway sps-9310vw-c xx g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2009 v2.0 3 connection diagram pin name function notes 1 vee signal ground 2 nc no connection 3 nc no connection 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 nc no connection 9 nc no connection 10 nc no connection 11 vee signal ground 12 nc no connection 13 nc no connection 14 vee signal ground 15 nc no connection 16 vcc tx power supply +3.3v 5%, internal connected 17 vee signal ground 18 tx+ positive transmitter data in 19 tx- negative transmitter data in ac coupled differential lines with 100 ohm differential termination inside the module 20 tx_dis transmitter disable internal 4.7 k pull-up. the bias current and modulation current are turned off if tx1_dis = high.
optoway sps-9310vw-c xx g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2009 v2.0 4 recommended circuit schematic 100nf vee 100 differential tx - tx + vcc_tx nc nc nc nc tx_dis 20 18 19 16 15 8 9 17 vcc 3.3v 10 nc tx_dis scl sda 10k 5 6 nc nc nc vee vee nc vee vee 14 2 4 1 12 3 11 7 13 10uf 1uh 10k td + td - re-clocker i2c data i2c clk vcc 3.3v 100nf 10uf 1. consult the chipset manufacturer s applications information for biasing required for tx outputs. some chipset outputs are internally biased and may not need external bias resistor. package diagram ( units in mm) note: since the sps-9310vw-cxxg is single channel device, the receptacle for channel 2 is not used.
optoway sps-9310vw-c xx g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2009 v2.0 5 revision history version subject release date 1.0 initial datasheet 2009/3/1 2.0 provide 18-ch cwdm 2009/8/1
|
